Kurtbomsan Kurtbomsan Mechanican Bird Scarer Cannon (KBS M1)
Kurtbomsan Mechanical Bird Scarer Device (KBS M1) works with LPG gas and produces an average of 120 db of sound, protecting your areas against various unwanted birds and wild animals without harming nature and living things.
– Works with 20 BAR pressure LPG cylinder
– Standard picnic cylinder (2 kg) is operated. If it is desired to be operated with 10-12 KG CYLINDERS, an adapter and regulator must be installed additionally.
– No need for any battery etc. devices.
– Adjustable time interval of 2 – 30 minutes (time between 2 explosions)
– Plastic parts are resistant to sunlight and ultraviolet light.
– It has a noise level of 110 – 120 db.
– Effective area is 10,000 m2
– Easy and simple to use
– CE certificate.
-Against birds in sunflower and corn fields,
-Against birds, pigs and various wild animals in fruit and vegetable gardens,
-Against birds and various wild animals in chicken, fish and other breeding farms,
-Against birds in feed factories and warehouses,
-Against bears that damage beehives,-Against birds that pose a risk during landing and take-off at airports
– The product box contains 1 main body, 1 end barrel (No. 30) and 1 fine adjustment valve (No. 39) (for small tube) and user manual.
– Mount the end barrel (No. 30) to the main body that comes out of the box by tightening it using a 10-11 wrench so that the barrel does not shake. Do not remove the diaphragm (No. 29) located at the end of the main body barrel!
– Connect the fine adjustment valve (No. 39) to the small tube.
– Turn the safety latch of the device to the OPEN position.
– Open the valve of the tube.
– Slowly turn the upper valve of the device (fine adjustment valve) to the 1.5 position. You will see that the bellows start to inflate and you will hear a ‘’click’’ sound after a while. After this, the bellows, which has completed its inflation, will discharge again and explode. Your device will now explode at certain intervals. If you open the fine adjustment valve all the way during the first operation, your bomb may not explode.
– You can adjust the explosion time setting by opening and closing the valve setting.
– If the precision adjustment valve is set to (0) zero position, the explosion time of the device will be longer, if it is set to (3) position, the explosion time will be shorter.
– Operate the device for a blasting time between 2 minutes and 20 minutes. (Do not use for a longer or shorter time.)
– Lubricate the device with engine oil once a week.
– When you will not operate the device, close the valve and set the device to SAFETY position.
– Ask our company for a regulator to operate it with a large cylinder. (Subject to an additional fee.)
Warning:
– If you notice that the safety is on before operating the device when it first arrives or in subsequent uses, be sure to check whether the silicone hose shown in drawing 3 is crushed and stuck. The silicone hose may stick and prevent gas passage. If it is stuck, release the hose from its place, open it with your fingers and place it back in its place.
-When first started, the gas in the bellows may not fill the gas tank and may not be sufficient for the first explosion. It may make little or no sound. Wait for the hammer to fall again with the fine adjustment valve in position 2.